Customer Reviews for VEVOR Variable-Speed 127mm Deep Cut Portable Band Saw 220V 10Amp Motor Handheld

A great little band saw, so much more useable for small objects than the horizontal bandsaw, don't know how I did without it

Cuts nice and straight if you don't rush it and let it do the work. Wish it was easier to see the degrees because it takes a little work to get it back to cutting straight. Otherwise works great.

I have never owned a portable bandsaw before and certainly not one equipped with a base like this one. This tool came mostly assembled with the only challenge being putting on the blade. Quickly overcome. I got this two days ago and already have used a bunch cutting 1/8 plate and even with the supplied blades ... so easy! Base is really sturdy an seems to be accurate on the cuts. The clamp locks down the workpiece really well. No need to get name branded blades right away. The two that came with the saw are fine. I'd go ahead and use those up. LED very helpful.

This is an excellent saw, well built and easy to use. No complaints or concerns regarding the saw. If I were forced to make a complaint, I would have to say the angle adjustment feature could use a redesign.

For being the absolute cheapest portable band saw you can buy, I was initially skeptical. After using it a bit, though, I'm pleasantly surprised to say that it does everything I expected with no evidence of any downsides. All I had to do was buy a better blade that is appropriate for the material I'm cutting. Otherwise it has been an absolute pleasure.

Quick dispatch and delivery (AU). Removed two screws, slide off covers, put on the blade. Put to lowest speed. Dry run. Replace covers. Cut through 25mm dia CrMo steel at 1 easily. So I love it so far. Where have you been all my life.

I’m really happy with this bandsaw. I only do occasional metalwork so I didn’t want to spend a lot of money on a toothed blade miter saw. I really don’t like the abrasive wheel chop saws. The steel demon diablo blades on a circular saw work well but they make tons of chips that fly everywhere and they have limits on thickness. I was able to cut 4” and 3” steel C-channel pretty easily. It cuts very straight if you go slowly. I also slowed the blade speed some. The included blades work well but I replaced them with a Lenox 18tpi blade from Amazon and it worked nicely on thick and thin metal. I would recommend it. Picture is a steel table I made with it.

Works great. I use it on a daily basis to cut material for my many turning and milling projects. I have a small workshop, so the larger floor mounted versions would be a tight fit.

took a bit longer than 2 days to receive the bandsaw, however it did arrive in good order. the directions need to be better for those that have never used this sort of tool before, i have so i did not have any trouble figuring out how to remove the guards and install the blade (i opted for a harbor freight 18tooth blade) the blade is easily installed "if" you place the blade in the bearing guides "first" then warp the blade back over the drive wheels making sure to release the tensioner first. that can be determined by visually moving the lever and watching the wheel move toward the other wheel. pretty simple once you take a look at how to do it. if you try to mount the wheels first and then make the blade fit the bearing guides? well good luck doing that! this machine is very well built, nice heft, not some light piece of crap but something that has the feel of a quality tool. the motor runs smoothly without vibration or unusual noise. i suspect repair parts can be had from harbor freight, via their bauer branded tool which appears to be the same machine as this vevor unit. maybe the same factory makes both units, not sure. as with any power tool, one should remember to let the tool do the work and not try to add weight by pushing down. if you feel you need to add weight by leaning in on the tool, you are probably cutting hardened steel or have a dull blade. either change to new and proper blade or stop trying to cut hardened steel. for the price this vevor unit is a winner, with a nice balance of quality/features and price. will this bandsaw last as long as one of the big name manufactures offering? maybe/maybe not, but i suspect treated correctly this unit will last the hobby/diy/intermittent user a lifetime. i am looking forward to building a vertical stand for this unit and also one to allow for horizontal fixed/vise operation, and it works out to be what i think it will prove to be, i will be ordering another one or two! highly recommend this tool for the home shop/diy/intermittent user, and would also suggest professionals that need a porta band saw every once it a while take a serious look at this Vevor unit. unless you are a professional plumber that uses a porta band every day, day in and day out, it is hard to recommend paying 3x the price of this unit.

Impressed. Very nice machine for the money.if anyone is looking for a good quality band saw hands down choose this one you will not be disappointed at all.