Customer Reviews for VEVOR Pool Rail 54x36 Pool Railing 304 Stainless Steel 250LBS Load Capacity Silver Rustproof Pool Handrail Humanized Swimming Pool Handrail with Blue Grip Cover & M8 Drill Bit & Self-Taping Screws

The VEVOR Pool Rail 30x22 is the helping hand we needed to get into and out of the pool easily. We live in a hot climate and the included cover prevents burning our hand on the hot metal handle. The included hardware makes a solid installation fairly easy. (Tip: Install the front bolts first, then mark the location of the rear two bolts. Remove the front two bolts, drill the rear two holes, then install all four bolts.)

Bueno en stainless steel 304. Sería excelente si fuera en stainless steel 316.

Very sturdy high qua!ity.

Liked the design of this rail as it goes all the way into the pool. Our first step is really low and felt unsafe. This gives me more confidence when getting in and out! The cover has faded a bit but no big deal, keeps it cool to the touch in the hot Florida sun.

They fail to mention you need a powerful impact drill to install this.. the bit included in the kit is basically useless. We rented an impact drill at local hardware store for about $20, but was still hard to drill. Also did not line up great because impact drill thru off the marks we made. Measure before drill every hole!!!If you don't have experience drilling concrete be warned! It can be done, but not nearly as easily as expected!! LolOnce the holes were done, install easy. Sturdy, good length for what we needed.

It get’s really hot in the sun. The covers help but they slip a little when you are pulling yourself out of the water.

This is exactly what we were looking for!

The blue sleeve faded within 2 weeks. Looks like it’s been there 10 years.

We have used this every time since installing. Our steps are deeper than most and this goes out over the water perfectly so it can be grabbed early from the deepest step by the smallest child (2 year old). I did not use the hardware that came with it - in my judgment it would not have lasted long in a wet environment. I used 5/16" X 2 1/4" heavy duty tapcon+ concrete screw anchors which both secured it quite firmly and gave me some peace of mind about longevity in a damp environment. I am very happy with this purchase and the relative ease of installation.

Terrific addition to our 20 yr. pool. Very stable. High quality. Contrary to some reviews, the cheap looking anchor sleeves work incredibly well in concrete or brick. Were you to hit rebar, I think the anchors would still work great even if they were 1" shorter. The drill bit supplied (12mm; so do not use a 1/2" bit) does not fit domestic hammer drills, but I cut off the end and the bit drilled very well (pilot with 1/4" bit). Need a ratchet socket to install lag screws; go slow to reduce heat friction. Hope this helps.