Customer Reviews for VEVOR Pressure Washer Pump 1 in Shaft Horizontal Triplex Plunger 4000 PSI 4.0GPM

The pump bolted right up to my Honda pressure washer and has more pressure then the original pump had.

Worked as it should ,easy to install simple to use

Great pump! Easy to install. 4 bolts secure this to the gasoline engine. Bolts hole match perfectly to my Honda GX 200, 2001 vintage. Pump has variable pressure knob to move from 2700 to 3300 PSI. The new unit comes with oil in the system. Also has detailed 20 page manual to walk you thru. The installation and operation. Even came with 6 new O rings. Highly recommend. A new replacement washer is about $670. The pump retails for $135, and it’s a much better pump than the original pump.

I installed this pump directly onto a Predator212 engine to rebuild my washer. So far, it has worked completely fine for me, though I'd like to have somee form of markings to tell what pressure it's actually set to when I turn that knob. NOTE: I could not find anything in the manual to suggest which port is for soap, so I did experimentation & the metal barb-fitting right next to the pressure-adjustment knob is soap-input. The plastic barb fitting to the lower-right of the head is an overflow line (output)

This New pump from Vevor Is serving my company well under very rugged conditions. Well pleased with product and service. Delivery was prompt and I intend on buying many more products from this diligent company. Well pleased.

This is a much less expensive 4400 PSI, 4 GPM power washer than the CAT Brand. But, so far, it seems to be doing the job. The pressure adjustment is very hard to turn by hand. I have to use a wrench to turn the adjustment. But this isn't a big deal if I don't intend to adjust the pressure very often. I haven't installed a pressure gauge yet to see if I do get the full advertised 4400 PSI. Hopefully, it will have or nearly have the capability to get the 4400 PSI. It installed easily on my GX340 Honda motor just as the old Cat Brand did.

built my own pressure washer with this pump and it is well made

I recently purchased this pressure washer pump for my dewalt pressure washer that failed. It worked great, bolts up without any problems. I also liked the adjustable pressure knob for turning down or up the pressure of the pump.

I installed this pump on my North Star PW with a 208cc Briggs and Stratton engine and Hikey axial pump. It’s operating at 3400 psi with the trigger off and 2500 psi with the trigger pulled. It was a simple install and really improved the PW performance over the 2.5 gpm axial pump. I have used it for approx 10 hrs so far and its performance is great.

Works great on my 13.5 HP engine! Some reviews have said it doesn’t put out the rated power. You have to pop off th red cap on the adjustment knob, comepletely remove the adjustment knob, loosen the set screw and tighting the locking nut down to gain more adjuatment. When I first installed it, I was topping out at 3,500 psi max. I changed that adjustment and now I can get well over 4,000 psi. I set it to just under 4,000 with the trigger pulled and it spikes to about 4,300 when I let off. I can’t speak on the reliability yet. I also plan to add a external unloader valve to keep it from overheating.