Customer Reviews for VEVOR Manual Trolley 0.5T Capacity Push Beam Trolley 500KG Push Trolley Adjustable for I Beam Flange

I haven’t fully assembled my hoist yet but the trolley looks and feels solid and rolls nicely on the i-beam.I’ll try to remember to update my review when the hoist is done.

As described as will work well for me. One heads up, to narrow the track the removed washers must be placed on the outside of roller as treads on bar do not continue in far enough.

Stout trolley but make sure your I beam has at least 2.75” clear height for wheel clearance and sloped surface is better tan flat as well.

1 Ton Beam Trolley a good value

Worked perfect

Very easy to install standing in a pickup bed. Great price.

After posting the previous 2 star review I was contacted by the customer service department. They asked me what they could do to make it correct. We corresponded and settled on proper compensation. They were very easy to work with and did what they said they would do. As of 11/26/18 I am updating the review to reflect the excellent customer service I received. Thank you for the quick and proper response.Next is the original review - Ordered 4 of these for a client. When they showed up, an entire wheel had fallen off. Upon closer inspection I discovered the bearings were damaged. Upon closer inspection of the other 3 I found that the wheel bearings were of different types and all had been damaged or had debris such as grit or rust with absolutely no grease in any of the 16 total wheels. Next issue is the rusted grade 5 bolts that hold the trolley side on the main pin. The shear strength of a grade 5 10mm bolt is approximately 7952 LBS. Per code all lifting equipment should have a 5/1 design factor. That means if it’s a 6000 LBS trolley it should be able to handle 5x the rated amount (30,000 LBS.) Though admittedly the shear force on that bolt is likely to be less than the total of the bolts total shear strength it should in my opinion be better than a grade 5 10mm bolt and certainly not rusted or damaged.I give it 2 stars because the paint was new and I didn’t find any issues with the welds.

I love it ! I have 2 and it makes my project much easer around the shop. Example one of the things I use it for working on my tractor charging out some of my attachments . I have a 30 gallon gas can that I load in & out the back of my truck at times. The trolleys are an excellent investment and save me a lot of backbreaking work .I would recommend this product I see it as a lifetime to .Thank you .

This product gives the same performance as more expensive units. The bearings are rated for its weight capacity, stay within in it’s advertised range and it will give years of service,

I have just made an overhead gantry in my workshop and fitted this beam trolley to it.Comfortably lifted out a 351 v8 with fmx auto attached, trolley slid along the H-beam smoothly with engine and transmission hanging off it. Well worth the purchase price!