Customer Reviews for VEVOR Linear Guide Rail Set, SBR20 1500mm, 2 PCS 59 in/1500 mm SBR20 Guide Rails and 4 PCS SBR20UU Slide Blocks, Linear Rails and Bearings Kit for Automated Machines DIY Project CNC Router Machines

made a table saw slide table

Rods have a nice smooth finish, heavy weight for lasting use. The slide blocks are also well made and slide easily along the rods. The tap holes are threaded for M6 bolts and about 3/8" deep.Great for quickly putting together a router sled if you buy two sets. Easy enough to mount permanently or use "as needed." You can find the video for doing that on youtube. .

Excelente producto

These rails are great. Very solid and straight. Bearings move easily.

Everything you'd expect. Straight, clean rails that are working perfectly to support my router sled. No problems or complaints.

The blocks could be better cast with better cut threading but overall seem to be pretty straight and strong. Using as guide rails for 10mm thick 410x410 aluminum plate for custom 3d printer. So far with about 20 hours of use on them they have tracked fairly well.

Hubby is happy. They're doing the job nd he'll be purchasing more.

Used in the fabrication of surface planer!!!

Looks like a quality product that will do the job for a long time. Fairly tight tolerances.

I got this to make a flush cutting jig for my hand router. I was able to cover a cutting board 18"x20" and level both sides in less then 20 minuets. This made the best jig I could ask for it slids very smooth in both directions. I was able to level both sides that I used to take hours tring to level by hand sanding. The Sbr-16 bearing blocks work perfect but they are a little tricky getting them to slide on the rail the first time. I hand 2 that just did not want to go on and I hit them on and some bearings poped out. I was able to snap them back in place and aline the block again on the rails. Its a learing experience for me making this jig with these rails but no regrets. I even ordered me 4 spare bearing blocks. to make more jigs to run on these rails.