Customer Reviews for VEVOR Heavy Duty Racing Wheel Stand for Logitech G923/G920/G29 Max330LBS Compact

The frame is very sturdy and well built. Doesn’t shake apart loose or flex. I run a 8nm fanatec wheel and the plat form holds it well. The seat is very comfortable as well as adjustable. There are lot of adjustment available for steering wheel assembly and foot platform. Sliding it up and down or tilting. The only small issues I see are that I am 5’6” and fit very well but someone taller or bigger might be cramped. The installation instructions are good but it still took me 2 hours to assemble.

For the price, it’s hard to beat. First thing to note, the package it arrives in is quite large as you might expect. I would recommend having another person to assist with the lifting as it is quite heavy/difficult to manage as one person. Assembly was fairly straightforward. The included hardware, tools, and instructions were sufficient but I would highly recommend using your own hand tools or power tools if available. The frame is sturdy once assembled. The seat is a little flimsy, but you can’t expect too much for the price. I was not able to use the M8 nuts to mount the seat as instructed, but the included M6 nuts were able to fit within the sliding rail to mount it to the frame. Additionally while there are multiple holes in the sliders to mount with, only one set of holes is spaced appropriately to actually mount the seat. This causes the seat to be mounted a bit more forward than what could be optimal. It’s not perfect, but works. I am 5’6” roughly 160lbs and fit just fine, but someone over 6” or near may struggle with this. I think I may invest in a better seat after having done a few hours/races now. As far as sim hardware, I am running a Fanatec DD wheelbase? and Fanatec CSL pedals, and Clubsport shifter. I had to drill some extra holes into the frame to custom mount my Clubsport handbrake as there are no provisions to do so. The shifter receptacle works fine with the Fanatec shifter. Even with the 8nm DD wheel, the frame feels sturdy and does not flex. There is some movement with the upright that the wheelbase mounts to due to how it, itself mounts to the actual frame. While there is a lot of adjustability, you do have to sort of disassemble parts of the cockpit to adjust it. It’s just by design but I could note that as a downside in some regards. Overall, I am satisfied with the purchase due to the value this product presents. Would consider buying again, but I believe Next Level Racing offers the “GTRacer” cockpit at a competitive but slightly more expensive price point.

Great value for money, a little restrictive for height, if you are over 6 foot you might not be able to adjust it too far, I'm 5 ft 8, with long arms and I have it at full reach and it works, if I were tall, it may get cramped.

It’s a solid rig for the price that works for my MOZA R5 base and pedals. Instructions weren’t great but eventually figured out some of the missing/bad parts. Set up overall was a bit difficult and time consuming. Once set up it’s solid and there isn’t any movement other than the seat itself moving slightly.

Caught it on a good coupon deal and it is solid. A couple of scratches when it showed up and there are a few bolts that really suck to put in. Very little wobble once together. My only real complaint is that as someone with longer legs, I’m a wishing for a bit more distance between the seat and pedals. Would definitely buy again all in all though.

Easy to adjust and customize for different types of racing. Wasn't difficult to assemble, comes with tools, extra screws, and a back pillow. The seat is almost too comfortable, even after racing I can just sit there and relax. Very happy with this racing seat.

Its a great sim rig for the price. I was looking at the NLR F-GT cockpit but chose this as it was on sale for $255 vs almost $600. The build quality is great but my biggest issue the instructions on putting it together. It skips several steps and uses wrong instructions. Use the NLR F-GT instructions as its the same steps to put it together. -One tip is when attaching the \"side frames\" to the \"floor posts\", use a washer as the bolt is too long or you can sand it down 1-2 mm. -The other pain point was attaching the seat support bars to the frame. It shows you use a long bolt that goes through the frame but you actually use 2 short bolts as seen in the F-GT instructions step 4. -13mm ratcheting wrench is your best friend If your on a tight budget but want the ability to switch from GT to formula racing, this is a great option. If you have $500-$600, i would consider the Marada aluminum rail cockpits.

Product is very sturdy and great for the price. My only complaint is the directions are not very detailed. Instructions on adjusting the pedals/wheel stand would be ideal.

This rig is super heavy duty and half the cost of wheel stands of this quality! Seat is extra thick and moves forward and back as well as the back that moves forward and back. So far I am extremely satisfied with this wheel stand/ racing rig!

I am beyond happy with my order, the quality of this racing sim is unbelievable. Every single place I looked, the same build rig is 900. The seat is my favorite color orange and black. It not only reclines, it also slides back and forth. That sealed the deal for me, I am 6'3 and get in and out with no problem. Super fast shipping, I had it in 2 days. Thanks again Vevor