Customer Reviews for VEVOR 4 Pack Leveling Casters GD-60F Plate Mounted Footmaster Leveling Caster 551kg per Leveling Caster Wheels Nylon Wheel and NBR Pad(GD-60F)

These leveling casters are awesome!!! Great product quality and great price for four casters. I will definitely buy more of these.

Great quality caster wheels, rotate freely and all work well. Levelling is easy, though you do have to get down on the ground to do so.

They work well. Easy to adjust and roll nicely under load. Used them on a South Bend 9A tool room lathe. Bought a second set for a Rockwell 21-122 milling machine. They worked well on both units.

The wheels sit back at a pretty good angle from the mounting point which means that there is. a lot of rotational force being applied to the mounting surface and the mounting surface is not large enough. While the caster could easily handle probably more than 720 lbs for the set when the foot is down, once the foot is raised so that you can use the wheels, the mount began to bend the bottom of my metal table because the load was now no longer centered over the swivel point and mount. Anything more than a few hundred pounds was too much. These might work if they are mounted to sometihing like a quarter inch steel plate but they won't work with lighter gauge steel or wood.

Quickly shipped and delivered, this caster set is exactly as described. I purchased this for a future project, so I haven't installed them yet. But the packaging was quite secure, and inspection of the parts showed no obvious defects in manufacturing. The wheels all spin and the ratchets all work. Not sure how they'll function under load but I'm confident they'll be just fine. A great buy.

I put four on my milling machine. When you adjust the feet, it's really easy to strip the teeth off the cast alloy ratchet. Then it's useless. It really needs a bearing between the foot and the screw thread, because it's so hard to turn that when you put an extension bar in the hole provided you strip teeth. The only way to get them to work is to lift the load up a bit to take the pressure off the foot (in my case a 400kG milling machine) and then try to adjust the foot. Good idea, but poor execution

Perfect sturdy wheels for workbench. Rapid delivery

Fantastic price. Wish my old castors had the new ratcheting features that these have. 2 1/2” wheel diameter roll well even with heavy metal working tools.

I am happy with the quality of the product. They are heavy duty, easy to roll, easy to apply the stoppers. Got to make sure the floor is clean

Great stuff works well, ___________________