Customer Reviews for VEVOR Compound Cross Slide Table Worktable 225x175mm For Milling Drilling Bench

good for the price, happy with the unit. you get what you pay for, some sharp edges, but over all its good.

For the money, it's a solid slide that needs some work. Be advised on the handles: there should be 40 hash marks on each handle, each hash mark measuring 0.10 mm of movement on the slide. Instead, I counted 39 hash marks on the large handle, and 38 hash marks on the smaller handle. So you'll need to do some math for multiple turns of the handle.

This is a great, heavy, little milling table.

Used this as the x and y for my home made metal lathe. Replaced the largest green and yellow slide table with the linear rod bearings for this one with dovetail ways and all my issues went away. No more chatter. I can turn hardened stainless shafts 12 inches around with no problem with a simple spindle and this slide table bolted to an I-beam. I definitely recommend for any milling work.

Heavy duty. Smooth movement. Sufficient adjustments. Good value. Highly recommend.

Out of the box, I adjusted the gibs to reduce all play in the ways. Mounted it on drill press. Machined a small steel object. WORKS GREAT! Very well made for the money......even for more money. Only improvement would be to put better, more accurate 'dials' on the 'x' and 'y' axis'. Other than that, well worth the price.

Does my woodworking project great!!

This thing is really nice !!

If you want a simple work table to use, especially for your drill press, this is a great table to consider and purchase. I found it to be accurate enough for what I am going to do with it. Is this something to use a professional machine shop and for cranking out a ton of parts? No -- but that should be apparent by the price point.The table requires some prep work once it arrives. This is what I did:1) Unwrapped and sprayed it down with brake cleaner to get all the nasty oil/grease off2) Disassembled the entire unit and sprayed it down again3) Took a wire brush to all the channels and guide areas to remove excess paint4) Sanded down the top deck to make sure it was truly flat5) Filed down all the spacers in the channel guides to remove any burrs6) Took a dremel with a sanding drum and knocked down all the edges7) Reassembled and greased the guides

Obviously price has a lot to do with the purchase of this product . A good solid base to begin with is the most important feature . This cross slide table comes with a few minor faults such as two missing thrust bearings from the slide shafts and the keys have to be cut down to enable the added bearings to fit . These are only minor items and cheap to rectify , and when repaired and the gibbs set right the slides work extremely well with little to no play and ease of movements in both directions , making this unit absolutely recomendable for the small home engineering jobs on the drill press and milling machine