Customer Reviews for VEVOR Bucket Tooth Bar 72'' Inside Bucket Width Tractor Bucket Teeth 9.84\'\' Teeth Space Tooth Bar for Loader Bucket 23TF Bolt on Tooth Bucket Enables Penetration of Compacted Soil and Other Materi

I use this as lifting forks to move things around the house. They also work well for sifting and cleaning up debris from trees. Serves the purpose well, and didn’t cost a fortune. The clamps can be difficult to tighten properly, but a little persuasion with a 20lb hammer takes care of it.

2 weeks after installing these teeth on my bucket I got my bobcat stuck without those teeth I wouldn't have been able to push myself back out of the muck. They could use some holes in the middle I ended up using a blowtorch and put extra holes in the middle. If you're not handy with the wrench this installation will kick your ass but it's a good price beats buying another bucket.

Ordered the tooth bar for my l2501, with a 66" bucket the tooth bar was approx 1" too long. Cut a half inch out of either side of the center tooth and welded it back together. The tooth bar then fit great and it makes a huge difference in digging and the teeth are a little long but it works great for carrying logs.

Well built but would not fit over my 48" JD bucket. Had to modify.

Tough game changing addition to my loader bucket. This is money well spent. Digs more effectively, uproots vegetation quickly and decreases the number of passes required to clear debris!

was not a exact fit but if figured that it would not be. just took out 1-1/4 inches of plate ,rewelded it and good to go. works well when fitted to bucket. I like the idea if I need it I can put it on if I need a finishing bucket I can just take it off. It takes a little time but it can be done with only one bucket instead of two.

was as advertised. fit bucket exactly with no adjustments needed. packed well works great.

At this price point, I didn't expect it to be perfect. 1st thing to note, it's NOT clamp on. No clamps or even the the threaded holes you would need for a set screw to function. Second, was missing some hardware. Not a big issue, $4 at Tractor Supply and I was good to go. Lastly, teeth didn't fit on mount. Holes didn't line up even anywhere near close enough to put the pins through. Do not purchase these if you don't have an angle grinder. You will have to do a bit of cleanup on the bar to get the teeth holes to line up enough to beat in with a mini-sledge. All in all, solid purchase. The time it took me to make it work was well worth what I saved over a more expensive bar.

I have not used them at all. This was an impulse. I saw & I bought. They look very heavy.

Works great digging into bank and pulling small trees up