Customer Reviews for VEVOR Bucket Tooth Bar, 1650mm, Heavy Duty Tractor Bucket 8 Teeth Bar for Loader Tractor Skidsteer, 2000 kg Load-Bearing Capacity Bolt On Design, for Efficient Soil Excavation and Bucket Protection

I decided to weld it to the bucket and this monster really performs. It is well built and in doings so was able to take a big load off of the tractor by simply plucking trees and brush out of our grove. reduced time by 60 70 percent vs.. a smooth blade,

Arrived 3 days earlier than predicted and seems to be a nice heavy good quality bar. The large 15/16\" bolts and nuts are not needed unless you wanna drill holes in your bucket for a more permanent mount. I just used the 5/16\" allen wrench set screws at the top of each tooth and its on there plenty secure for me digging in shale and clay. Only suggestion is turn all the allen head set screws out some before trying to slide it on and use a hammer or wood block to tap it back tight on the bucket. Its mounted on a 2024 massey ferguson gc1723e tractor.

I was very impressed with quality and ease of use. I have a JD 1025r and the bar fit perfectly. The teeth are the rock teeth style and seem to be tough enough, not sure where to buy replacements. The bar comes with bolts if you want to bolt it on but I preferred using the allen screws that are in each tooth shank for easy on and off.

Great product and affordable. I have a mid-sized tractor and trying to dig and level parts of my yard was nearly impossible due to how hard the ground is. Added these teeth has made the difference!

Nice piece of hardware for my tractor. Nice piece of hardware for my tractor. Nice piece of hardware for my tractor.

It's ok for the price, steel is pretty soft. I've bent it four times so far using it. If your not using it around rock I would imagine it would work pretty good. Rocks and roots it doesn't do good.

Look, I’m gonna call a spade a spade. It’s a cheap knock off. So the premise of my review is based off performance for price. I used the set screws and set screws only to put it on my 1025R’s bucket and went nuts at my dad’s place removing literal tons of dirt. Except he lives in a neighborhood aptly named granite bluffs. Even with the janky mounting (I wasn’t inclined to drill holes in my bucket) this thing held up digging through caleche for two days. Far exceeded my expectations and I slightly bent one tooth. Is my downside I see in the future is that the teeth aren’t replaceable individually. You can buy three whole bars for the price of one name brand though…. Overall, unless you’re a pro using it hard every day, this will likely suit your needs. Especially for the price.

unit is very heavy duty. unfortunatly, the 48\" did not line up to my 53\" Kubota bucket. Unit was returned with no hassle or cost. Very good service.

I've used and abused these. No issue with them falling off. Just get them good and tight. Perfect fit for my bucket.

Hard to beat the price point. You better be ready to alter the tooth bar or the bucket to accept it though. I just ended up welding it on instead.