This review is for VEVOR Arbor Press, 0.5 Ton Manual Arbor Press, 4.6\" Maximum Height, Cast Iron Heavy-duty, $53 on amazon. I have a beefy 3 ton arbor press which I use quite often so I thought this ½ ton baby brother would be a nice addition onto my work table. I didn’t want to dedicate its location by drilling into the work table so I mounted it atop a ¾” thick plank which is C-clamp secured to the table top (two 3” C-Clamps). The set up works great, I can press down on the handle with my full body weight and it stays firm against the table top. I use some Crazy-glue to secure each of the handle caps as they tend to fall off during use. I added 1/2” spring clamp next to each cap to further assure the caps don’t come off. As received the ram was not snug against the front and side adjustment screws and were too tight if screwed in fully (so as to prevent the ram from moving). Found that by adding a split ring washer to the screws the ram adjustment was perfect with the screws fully tightened. Nice baby arbor press with three different style drifts.
STEPHEN C MACDONALD 
