Customer Reviews for VEVOR 7620mm Mini Split Line Set, 6.4 & 9.5mm O.D Copper Pipes Tubing and Triple-Layer Insulation, for Mini Split Air Conditioning Refrigerant or Heating Pump Equipment & HVAC with Wrapping Strips.

Exactly what I wanted

Exactly as described, works perfectly.

Great price great quality.. very satisfied with my purchase... get the job done shipping extremely fast..

Cheaper than my supply houses, which were out anyway, Perfect. Included wire and drain line. unexpected. No leaks or issues with flares. Will buy again.

Works fine, 5/8 piping was kind of thin walled and kinks easily. I found it easier to route the lines carefully by splitting the insulation so I could bend each line individually.

No disappointments, timely shipment, will order again when needed. Would be nice to have the suction line 4" shorter on one end due to all the evaporators are pre-cut with this difference in length. I always have to cut and re-flare one end. Condenser end stays flush.

Great deal but compared to the more expensive ICOOL branded linesets, the insulation is not as thick and the copper seems to be a slightly thinner gauge.I used 2 sets of the this lineset to run to indoor mounted air handlers for mini split heatpump, had minor issues with using a torque spanner wrench with the 3/8" line slight twisting requiring me to reflare it, flaring is somewhat hard to do a single flare so I ended up doing a double flare for strong connection to the mating end. Recommend support the line straight in to the flare as your torque it down to specification and use nylok blue on the mating side of the flare and a thin finger rub of it for the back side where the nut meets up.Also the 3/8" cannot be bend as much as the 1/4", I STRONGLY RECOMMEND doing no more than 45 degree bend then moving down slightly and doing another 45 degree bend. I had flat side and kinks in the line from the first time with bending tool, and the acceptable second time, I had starts of minor ripples in the line but still very much usable line.Great deal but you might have to re-flare if it twists or kinks which is possible with this thinner tubing.

The price was very reasonable, and the quality was as good if not better than the original line set. The original line set was damaged, and the replacement from the store was over $250.00, almost 3 times the Vevor price. We had no issues with the installation, and after 3 weeks the air conditioner continues to keep us cool and comfortable

Purchased for installation of new mini split system. The tube set was received in a timely manner and did not have any discernable flaws. The flare joints do not leak even though installed by this non professional DIYer. The electrical cord appears to be very heavy duty. Completely satisfied with my purchase.

The copper is a little thin so be very careful bending it. As with any lineset you should unroll it on a flat surface. The insulation is better than any lineset I have ever installed. The insulation has a tough coating that also looks nice. I didn't bother covering it up completely. The ends where flared well, I did cut it to length and reflared one end.