Customer Reviews for VEVOR 3-Point Quick Hitch, 1360 kg Lifting Capacity Tractor Quick Hitch, 70 cm Between Lower Arms Attachments Quick Hitch, No Welding & 5 Level Adjustable Bolt, Adaptation to Category 1 Tractors

Arrived with shipping box beat up very badly. It’s all steel and parts sticking out of the box weren’t bent, just paint chipped off. No parts missing. With remaining cardboard removed it looked pretty good! Nice welds. At assembly found the rubber grip handle just slid on loosely. Used contact glue to attempt to snug them on, hope it works. Started prepping for its use to mate up to a Ballast Box. First thing the Hitch Receiver that came welded on had the retaining pin hole too small, wouldn’t fit a standard 5/8” pin, but a hitch fit fine. Awkward to step drill out due to room to fit drill but was able to Drill it. Next I found the lower link “Pins” they supplied were thin wall tube. Made 3/4” shafts to fit inside them. Then found one side had been drilled crooked, will work but again, poor manufacturing QC. When mounting to tractor those pins were too small, not 7/8” dia. Cat 1 like tractor. Tried 7/8” std Cat 1 pins, but they wouldn’t fit as both holes were too small. Drilled them out to 7/8” and now okay. Then learned although advertised as Cat 1, all 3 “hooks” are made for Category 3 diameter pins. Had to buy (4) Bushing Kits so all four of my tractor attachments fit as they should and not like a rattle trap. Can’t say I’d recommend this purchase. It does work but most folks likely wouldn’t spend the time, effort and money to correct the poor quality issues and conversion bushings.