Customer Reviews for VEVOR Single Horn Anvil 24Lbs Cast Iron Anvil Blacksmith for Sale Forge Tools and Equipment Anvil Rugged Round Horn Anvil Blacksmith Jewelers Metalsmith Blacksmith Tool

I have been making blades for over four years, and wanted a second anvil. I saw the attractive price and decided to try it out. The description says it's cast steel (never purchase a cast iron anvil. Iron is to soft) and it had a 52 hardness. I built a three legged base with 1/4" 2"x2" tubing for the legs and 1/2" plate steel for the base for the anvil to sit on. I filled the legs with sand, tapped the legs with a hammer to get as much sand to compact. This adds weight that you want to keep it from jumping around when using. I dropped a 1" steel ball bearing on the anvil after attaching it to the base from 2' above. The "rebound" of the bearing was 14". When striking some HOT out of the forge 1095 carbon steel with a 3# cross pein hammer, the sound of the strikes were dull and low. (that's what you want) The farther toward the rear of the anvil you strike, it doesn't have the same sound or recoil as the center of the anvil. I also question the hardness of the face. I did manage to put a small dent in the face. I will test the hardness later to see what I get. Overall, it's a great buy at the price! It doesn't come close to my 300#TFS anvil, but it also didn't cost $2,800.00. I would recommend this VEVOR anvil to anyone getting into blacksmithing/bladesmithing, or just needing something to pound on.

This anvil is exactly what I was looking for. The 66lb. Is perfect for my stamp work. Very solid, price was great and free shipping and it came in 2 days! I am very impressed!

Excellent value. Not a “perfect “ anvil, but fully functional and all working surfaces flawless. Pritchel hole is too large and in a bad position. I machined an adapter that works pretty well. Rebound is better than my old anvil but not as good as some. However rebound is related to hardness and too hard would make it prone to chipping. I’m happy with it.

Originally, I received the wrong item. My experience to return the wrong item was easy. This product was a great help for my grandson's early interest in blacksmithing.

I bought this anvil for two reasons. 1) It has an HRc hardness of ~55, instead of only ~50 which is what the blue ones are. 2) Because the picture shows the horn and round hole being flush with the flat surface of the top of the anvil. This second reason turned out not to be the case. There is about a 1/ to 3/8 inch step there. I have since learned that the step is useful for some things but it does mean the round hole is not the same height all the way round, which makes it less useful for using it as a Pritchard hole. I plan to weld some fender washers onto the end of a pipe that will fit in that hole, and then grind one side flat to fit in the hole and solve this problem. The anvil itself is quite good, and for the price is down right amazing. Edges are sharp, so you can break the corners with a file to set the corner radiuses at the size you want. The anvil rings a bit, but I think with a magnet under the horn and a chain around the base this tones it down nicely. (other anvils also ring and can be quieted the same way)

The anvil was shipped well, and the anvil is exactly what was advertised and expected. Overall, a good product for the price and would recommend Vevor.

It’s small and heavy just like you like. I’ve already restored and repaired so many things. Absolutely perfect if you would like the option to move it around or take it somewhere to work.

Pretty much exactly what I expectedCan���t wait to use it

I use it for jewelry making.

Gold smith .Top little anvil for the price the quality and the style ! Very nice tool holes are good to for bending and riveting as a jeweler this little anvil will last a life time . Very happy!