Customer Reviews for VEVOR 3 Point Hitch Pallet Fork 2000lbs, Fork Attachment for Category 1 Tractor, 25.5'x22'x41', Steel Tractor Heavy Equipment Attachment, for Tractor, Skid Steer Loader

If you need pallet forks these will work temporarily, but loosen easily without bashing the levers with a hammer every 30 minutes. The center support rod is really for show.

The forks are strong and fit over the lip of the tractor bucker well - their is a minor manufacturing flaw and a design flaw: One of the tightening bolts threaded connector to the fork is welded incorrectly causing the side of the bolt to rub against the side of the fork bolt chase see image). The fork screw -down clamp bolts look like they are supposed to have flat contact surface that 'should' allow the bolt to tighten without causing the round contact surface to 'walk' on the bucket. This is a problem and a better contact point could easily be designed that would not walk on the bucket surface (a design that would allow the bolt to tighten without the contact surface turning with it). However, with that said, I greased the bolt into the nut/contact surface and left the bolt about 3/8 inch; from the contact plate which allows for the contact surface to better seat while tightening down the bolt - the contact surface still walks on the bucket, but not as much.

Great forks, easy to attach to bucket but doesn't hold very well. Wish I had gotten longer one, needed more reach. Overall pretty satisfied.

Surprisingly works well with bucket. Recommend greasing threads prior to tightening to bucket. I use these forks with my 1944 Ford 2N tractor with 19-23 Dearborn front loader.

Also bought for my husband, and he loves them. They work great, just what he wanted. He can lift up things in his barn to get them off the floor.

I got these to use with my MF40 loader to move pallets. They install easy, and work well. You need to use a tool for extra leverage to tighten them down - a large box end wrench works well. The only issue I had is that the crossbar doesn't get narrow enough for the smaller pallets, so I ended up not using it at all. Used some spray paint to mark the spots on the loader so I can easily reattach them at the right width.

Product as described. Functions well on my Deere 1023. Shipping / tracking was VERY BAD! It took longer than expected to arrive.

So far it seems to be working really good if it keeps working like this, I will raise my score to a 5 all the way across

Good forks built well the screws that hold forks to bucket need better swivel. Make sure you use support bracket to keep forks from spreading

The quality of the forks, the hardware, fit and finish are excellent and the price and service made this purchase that much better. Terrific experience.