Customer Reviews for VEVOR BS-0 Dividing Head 5 Inch, Precision Dividing Head Set with 5" 3-jaw Chuck & Tailstock Dividing Plates for Milling Machine

As a Tradesman Fitter and Turner I found this to be good quality and great value, everything was as it should be , other more expensive brands would probably last longer if used in thousands of different jobs , however this item will last for most tradesmen and hobby machinist on hundreds of jobs

I bought this fully expecting to have to "tune it", but it's fine right out of the box. Well packed, and coated in oil to prevent rust in transit and storage. The instructions are available off the internet if the enclosed manual is a bit sparse. The box contained all the accessories shown in the images (including chuck jaws, screws, etc) and all appear to be taiwanese quality (that's quite good if you don't know) I wouldn't be surprised to find this made in the vertex factory based on fit and quality. I will still strip it down and clean it before serious use, but first impressions on unwrapping and checking is great.

You are getting a lot for your money on this bad boy

Its fine,.......... BS g if CNN jf xnxx HX xnxx fb cnc c TV cnc HX FX H fb IC TzccFdlFLq3Fj0w_bBdH0m3yt_ojla2D8AxKs-Sg_uI& HX do us go if GJ HX x Bucyrus vcch do is good to Oz go HX go ya today

This is a typical chinesium product, had to be stripped & cleaned, chuck jaws would hardly open when first unpacked had to dismantle & grind metal away to free up the internal circumference of the body. Allow around 2 hours to strip and clean the rough edges on all the parts when dismantled, once this is done the unit worked well. Still good value compared to top line expensive products.

bought to use the MT2 taper with a ER collet chuck. about +/-.002\". not bad for the price and good enough for what im doing. there is tolerance stacking with the ER. so the head its self is proably around +/- .001.(measuring concentricity on MT2 bore to head roation)

Haven't used it yet but appears to be very good value for the price and arrived on time. Happy purchase.

I had to return the first one. The base guide was skewed. Sent it back ordered another and wow what a piece of equipment. Everything I needed and more nice precision Tool.

Pretty hard to beat for the money. My only complaint is that the key ways are not machined on center. I ended up making new keys for the head and re cutting the key ways larger and making new keys for the tail stock.

This dividing head is not a bad deal for the price point when compared to other brands in this size range. The accuracy of this is OK for the hobbyist that is not working within very tight tolerances, it is out of tolerance 1 degree in it's 360 degree rotation. When received it is highly recommended that it be disassembled and CLEANED! The worm gear for the head rotation is very sticky and has what appears to grit/fine sand/lapping compound mixed with the grease ... not sure for the reason of this?! The rotation pin/locating handle was stuck and somewhat rusty inside and had to be disassembled and cleaned to make functional. The manual that comes with this is mostly worthless with the exception of the indexing charts in the back! With this being said it is not a bad tool for the cost and will make a very good cost effective tool for someone that is desiring to learn how to use this type of tool without the cost of one that is three times the price.