Customer Reviews for 60V DC Motor Brushless Electric Motor 2500W BLDC Go-kart Powerful Mini Bike

This is a great kit to get started with. Keep in mind this is not plug and play. There is only one connector that is guaranteed to click to ANYTHING and that is only for the motor hall sensors. The motor phase wires (thick blue, thick yellow, thick green) attach to the yellow/black bus block with the 5 screws, along with the thick red/black wires for your battery.A few tips if you are mounting this to a Razor MX500/650 or RSF:First, on the motor, you need to remove the 3 phillips head screws and lightly counterbore the holes until the screw heads sit just below the surface. Use a drillbit that is slightly larger than the screwhead. There is a video on YouTube from "MarleyJax Garage" where he shows the complete install for a kit like this and shows this portion in detail.I highly recommend to get a lithium ion battery that matches the voltage for the motor kit you're buying. If you use SLA batteries or add more SLA batteries to get higher voltage, you will have terrible battery life. After I got this kit running, I put in an order for a lithium battery set just a few days later. It was horrible.Yes, there is a 3 speed setting. If you do nothing with this connector and just leave it hanging, the motor will run at full speed. If you want to use the speed selector, get a throttle with 3 speed switch. It will probably connect. If you want to limit the speed without a switch, you can do this with a paperclip. Put one end of the paperclip into the black wire (middle) and then jump it to one of the other wires. I forgot what colors they are and which color gives you medium and low speed. If you put it on low speed, it will dramatically improve battery life. The low speed is still much faster than stock.The acceleration might be neck-breaking for a child. The original throttle and motor controller do a great job of gently easing into the acceleration. With this controller, the second the throttle engages it is pretty violent. It's not a deal breaker. Just be aware of this.If

Liked how stable it was and the quality of the product was quite nice

Had to counter sink a couple screws then hooked it up to my Razor MX-650. Ended up buying a different controller due to the size of this one and the fitment on the bike. Right now I have my Razor going 40mph. The motor also can recharge the battery too. I think it's great!

I installed this one a Razor mx650. It did the job and my son is having lots of fun with it. The thing to understand is that the throttle input in most gas engines controls the amount of effort that the engine puts out. In this controller, it controls the desired speed and the controller will always put out maximum effort until the throttle speed is reached. How this feels different from a gas engine is that starts can be very jerky.

Works in a razor eco smart metro scooter

Excellent motor. Installed onto a converted moped. It will do at least 35 mph with no problems. Motor is strong and efficient.

I installed this on my kids razor dirt rocket mx650. Almost perfect fit.

Great product. Lots of power. I installed in a mini dirt bike. Had more than enough power.

This 48 volt DC motor has great potential for a variety of applications. NO instructions are included, so take that into account.

Fit right onto razor sx500 plenty of torque.