VEVOR 130W CO2 Laser Engraver Engraving Carving Print Machine 900x1400mm Workbed

The exhaust tube goes IN the machine! It’s more like a filter tube. So the reviewer who said it falls of, well duh you’re not supposed to put it somewhere on the outside. Second, every CO2 laser engraver needs its mirrors adjusted after you receive it. It’s impossible to do this in the factory and then ship it. You have to calibrate it yourself, which is not hard, but you have to do it. Don’t buy something you know nothing about and then complain.

i bought this hoping it would help my business. AVOID THIS MACHINE AT ALL COSTS IT IS TERRIBLE NOT Aligned ! customer service is trash for this much money there should be someone to talk to.... no help at all do NOT BUY THIS MACINE

I paid over 400$ for this pile of scrap metal. Came non working. Then when I reached out to support they refused to take it back. Do not buy. I have spent over 30 hours trying to get it to work. You basically have to rebuild it. Stay far away. It is just a 400$ paperweight

It's to early to tell seems like it is ok no broken tube or damaged crate. Will add once I start using it

When I received this laser, the light in the back had one wire not connected. The kill button didn’t work. The Corel software wouldn’t work. The key switch didn’t work unless you wiggled it. It was way noisier than I expected. Overall, I was very disappointed in it. I wasn’t expecting a top notch machine but I did want something I can at least use. That is why I’m sending it back to Vevor.

Average quality components, no response from vevor support but kind of to be expected for cheap chinese product. Overall think it's a great little unit that works really well for it's price point. The seller was quick to ship and provided prompt and satisfactory resolution for a damaged power cable. The instructions poorly detail initial setup and give no useful specifications or general use instructions so be prepared to investigate and experiment. I am happy and think I got value for money but if you want a supported machine you best save up at least twice as much coin.

I REALLY wanted to like this laser. On paper, it has all the feature I'm looking for at a great price. There's one problem: THERE IS NO SUPPORT!!!! The user's manual is less than worthless. It only has superficial information like "put water in, turn it on". Any technical support questions take at least 4-5 days to reply. When you ask the Chat support ANYTHING, they simply send you the SAME WORTHLESS manual in PDF format! I should have save my money and bought a more established brand that provides basic support in under a week. In English!

I’ve been having issues with this machine since the beginning and the only way I was able to communicate with the company was through chatting and that isn’t an effective way to communicate. The laser machine costs thousands so why wouldn’t technical support be available? I’m strongly thinking about contacting my bank to get a refund. I can’t use this machine as it’s but working properly. The water hose wasn’t connected so when I’d filled the machine up with water water leaked out of the machine. Looks like I’m going to have to go through a different company. I’m very disappointed as I was excited to use this machine but it’s no good.

Great laser, great pricing, to my surprise - absolutely amazing support! Obviously, not native English speakers, but this caused no issue whatsoever. They immediately identified my problem from my description and video, then responded with a description, a video and picture that showed the exact issue and how to resolve. Laser is excellent quality, needed mirror adjustment and cleaning, but these are minor things - and honestly standard. My only complaint, and I mean only complaint, is that it doesn’t work with LightBurn. I could change the controller, cheap and my total cost would still be less than any other machine I’ve found! Excellent quality and price, I highly recommend to anyone looking for a K40 laser!

After numerous youtube searches over the years on K40's, i was preparing myself for really anything and prepped to do a lot of work once the laser got in. unboxed the laser and was ready to do design another exhaust, align the lasers and do the few hours of work i've always seen... However, this was completely different. The exhaust was a really great PC style fan that's in the machine itself and was a full metal enclosure, not the plastic external exhausts you see on most of them (the ducting is, but that's perfectly fine). the pump hooks right to a threaded connector on the machine itself and turns on as soon as the machine comes on to keep the machine protected. I got all of that work done and started aligning the laser.... on every corner it hit the same spot on the laser head itself... IT WAS ALREADY ALIGNED! i then did a ramp test to gett he proper distance from the head itself and did my first few tests and honestly... from unboxing, setup, and sending files i was up and running within an hour. The only things i'm adding onto this machine are an air assist, laser diode to see where i'm about to slice as well as an ammeter to see the actual power i'm outputting. But in reality, this machine is setup and ready to go right out of the box. Uploaded a photo of my first test 1) the honeycomb bed does not come with this machine, but was only $20 on another website 2) i made a basic sketch and cut out the top piece above the cats head as a one test and then was in the middle of engraving a cat when I had to leave my house and obviously couldn't keep it going without keeping an eye on the machine. 2.5) i was running a bit too slow, but as a quick test, i'm throughly impressed. 3) from someone who owns other CNC machines, this was just fantastic right out of the box. I would not hesitate to ever put down money on another one of these.