Customer Reviews for VEVOR Manual Honey Extractor Separator 3 Frame Stainless Steel Honeycomb Drum Spinner Crank Beekeeping Equipment Apiary Centrifuge Equipment

I liked how easy it was to put together. I would recommend bolting or screwing the legs onto a piece of plywood. If you spin it super fast with uneven frames, it will get really wobbly. We extracted about 2 1/2 gallons of honey using this and I feel it was worth the research and the money.

Good product does gets the job done but... I had to bolt it down not just on the bottom of legs because it was very wobbly even after it was secured at the legs still wobbled alot like it was off center... it's super easy to assemble it's the size is as advertised i still use it so the value was worth it to me just be aware that when you speed up the spinning it will wobble alit unless secured well

I only maintain a couple hives. This works great for my needs.

We are small scale beekeepers and this fits our needs perfectly! Took the advice of others and screwed the base to a sheet of plywood for stability.

I rated this item pretty highly even though it came damaged. I was going to complain but it was a clean dent that I was able to pop out almost completely. It works and I was happy with the overall item for the price. Just be aware that even though the outside of the shipping box doesn't show signs of damage, the way it is packaged, it can get dents with rough handling (thanks FedEx/UPS or whoever got this one).

Works as it should

You can buy this EXACT same extractor branded different ways for twice the price. This was the first time I have ever extracted honey. The extractor was easy to use and fairly easy to clean. The spout where the honey flows out of the extractor should be a little lower as the way it is will always leave about 1/2" of honey in the bottom, I had to tilt the extractor and hold it that way for a while to get the last 1/2 inch out. I don't think you can beat this product for the $$

Vary easy to put together and take apart for cleaning. We'll worth the money.

Did a great job after straddling the frame on a platte , and at first deep frames hit the lid so that needed to be adjusted , but as far as spinning (after the adjustment) did the job and the best part is that the handle can be removed as well as the frame holders so it’s easy to clean

First chance to use. I found this ideal for a budget minded home beekeeper like myself. The operation is all but frictionless, even the crank handle has bearings in it. Very easy to spin three of the largest Langstroth frames. The lids fit snugly enough to seal the chamber and seal out bugs if you got to lunch yet can be totally removed and put aside allowing painless access to insert or extract the frames. The bottom spout is quite sufficient to hold the contents and operates smoothly. The frame cage sits on a single ball bearing already greased, just be careful when you clean not to let gravity or force of water blow it out and lose it. However, it looks like it could be cleaned not even removing the cage with no chance of losing the special grease and ball at all. I didn't but it very likely operates even better and faster if the three legs are bolted down (holes already drilled in legs) to a floor or 4'x4' piece of plywood. Assembly was short and simple, easy enough to take down and store. Light enough to be lifted and stored in my attic space. I am very satisfied with this purchase.