Customer Reviews for Vevor Brand New Large Two 2 Frame Stainless Steel Electric Honey Extractor

Over all satisfied with the purchase. Easy to assemble and easy to move from one place to another, not heavy at all. Tried to extract 4 medium frames radially, but wasn't happy about the outcome. Too much of honey left in the frame. Then I tried extracting frames tangentially, putting frames parallel to the walls. Using this method you need to extract one side and then reverse the sides and extract again. So it is a bit time consuming. The other problem is the drain cap is about inch above the bottom, so get all the honey out you need to tilt the extractor which is a pain. Overall happy with the performance.

this honey extractor works great, and the price was far less than any others out there. it is easy to use and the ability to adjust the speed help from making a mess

Works great. Wobbles if you don't brace the legs. A simple 2x4 T plate reduced the wobble a lot. Other than the drain being to high up it is a good unit overall. Would buy again!

Great Entry Level Extractor for the Backyard hive keeper. I extracted 2 Shallows the first time I used it. Worked Perfectly. The Speed, etc was more than sufficient. It was easy enough to clean and put back up. Gave me the flexibility to extract and put the supers right back on the hive to be filled up again. Thank you Vevor for a product I would purchase again. Just ordered a 1.25hp router to go with the 3.25hp router I got from you guys.. Thanks again. Just used it for the first time yesterday. Also pleased with the performance of it.

You can’t beat the price. It works good. Came dented but popped right out. Missing a screw for the safety switch. Just had to buy my own screw for it. But it works great and glad I purchased it

I'm so glad I made this purchase and also deciding to go ahead with the electric over the manual model. The extractor arrived in perfect condition, with the exception of one missing bolt...which was an easy fix and no reason to take away a star. As far as assembly goes, I had the extractor put together in no time, after it was washed out and dried. I love the auto-shutoff safety feature when either side of the cover is lifted...no need to turn the machine off while in use. As far as operation goes, it worked perfectly and ran smoothly with just a slight wobble. I'm absolutely sure the wobble will not occur once the extractor is bolted down. I used the extractor with four deeps at a time without any issues and I'm positive it'll work just as well when extracting 8 mediums! All in all, I'm absolutely happy with my purchase and if need be, I would not hesitate to purchase a larger extractor in the future. 100% satisfied.

As in the title. Works well, movable, minimal vibration (not bolted to anything). Increase rpm gradually. Not easy to clean, but none of them are, so relying mainly on self-preservation powers of residual honey and wax. Good product for an amateur beekeeper with 1 to 2 supers.

I have used my 8 frame extractor a few times now. It works well and is fairly easy to use. It's kinda tricky to reassemble. It could spin a tad faster on high but it gets the honey out. Overall value is very good and I am happy with it. I spun out about 150 pounds without issues. The honey gate is a little high and it's tough to get all the honey out.

I love it... Works great... I don't like the legs to be attached... I use it without them attached. Still worked great....

I purchased this Vevor 4/8 electric extractor as my first extractor, and was overall very pleased. Assembly is straightforward. The motor is quite quiet as is the full process when your spinning with some balance in the frame holder. If running out of balance try to minimize by inserting another frame(s) to reduce the mismatch. In these cases bolting down the legs would help. We had fun extracting 66.5 lbs from 14 frames, some deep and some medium or shallow. Ultimately placing either size in tangentially provided us the best results. Trying to spin the smaller frames radially didn’t work effectively for us. Clean up was relatively easy. The single piece frame holder has to be removed for a thorough cleaning and this can only be done by removing four nuts to remove the cover/motor assembly. That feature makes an economic design but is why I rated a four and not a five on features. After leaning the extractor on its side to pour all remaining honey through the honey valve we still spooned out another 1.5 lbs from inside before deciding to stop and clean. Overall, I recommend it.