Automatic Garage Roller Remote Door Opener Quiet Electronic 800n 2xremotes
Rated 3.5/5 based on 11 customer reviews

Automatic Garage Roller Remote Door Opener Quiet Electronic 800n 2xremotes

Available: In Stock
Product SKU: YHD0-1VJLMJ000001V3
$178.99 AUD
This automatic opener has an electronic obstruction system that provides safe and reliable operation. With a whisper quiet high-power unit and slim line design, it gives you the peace of mind that only quality workmanship can give. The roller door opener has an electric limited switch. It was designed for easy install and reliable, starting with safety features down to its profiled design. Security is taken care of by a rolling code technology remote handset that changes with every press of the button. This makes the roller door opener the right choice when choosing your roller door opener.
Minimum side clearance:
1. Minimum side clearance from door curtain to outside edge of mounting bracket: 135 mm (160 mm recommended).
2. Minimum side clearance between door curtain to inside edge of mounting bracket: 85 mm (110 mm recommended).
3. For ease of installation, minimum side clearance from outside edge of bracket to wall should be 155 mm.
Right-hand installation:
1. When the door roll is on the floor, rotate shaft backwards and forwards by hand and then release. This action will allow the roll to centralize itself on the shaft.
2. Slide drive unit onto shaft, ensuring drive lugs engage fully with the narrowest spoken on drum wheel.
3. Lifting door onto mounting brackets(ensuring curtain roll is round in correct way) centralize curtaun roll with opening.
4. Ensure motor assembly is fully engaged with drum wheel spokes. Clamp shaft to mounting brackets using"U" Bolts supplied. (Use "U" bolt in opener pack for MOTOR end).
5. Disengage the motor drive by pulling the manual release string downwards.
6. Ensure door is correctly balanced and is not binding or sticking within vertical tracks.
7. Ensure locking bars(if fitted) are moved to the retracted(unlocked) position and keys removed from the lock.
8. Mount control unit approximately 1.6m from the floor out of the reach of children. Use NO.4X1"self-tapping screws and raw plugs supplied. Ensure aerial is clear of all steel supports and coiled electrical leads. Fit plug from motor unit into bottom of control box.
9. Connect the control unit power cord to an adjacent socket. Ensure that the socket is properly earthed.

Note:

Right-hand installation only. If left hand, limit switch will be reversed.

  • Utilize USA Microchip for controlling the motor, reliable and stable.
  • Powerful and quiet DC motor
  • Soft start, soft stop, smooth operation
  • Easy installation and programming
  • Automatic safety reverse when obstructed
  • Manual release in case of power failure
  • LED light courtesy
  • Photo-beam/ Safety sensor are available (optional)
  • Backup battery function is available (optional)
  • Access control is available (optional)
  • Right and left side installation are available
  • Auto close option
  • 2 remote
  • 2 years warranty
  • CE certification
Specifications:
  • Standby power consumption: 7 Watt
  • Max. Lift Force:800N
  • Input voltage: 220V/50Hz
  • Motor type: 24 V DC permanent magnet
  • Motor power: 100 Watts
  • Working temptature: -20°C-70°C
  • Control board voltage: 24V DC/5V DC
  • Light globle voltage: 36V/1.5W
  • Receiver type: FS6KAM
  • Transmitter frequency: 433.92MHZ
  • Control distance: 50m max.
  • Coding type: Rolling code
  • Number of code combination: Over 4.29 billion random codes
  • Maximum door opening: 270 sq.ft
  • Maximum height/Drum rotations: 5 m

Package Content:
  • 1 X Motor
  • 1 X Control Box
  • 1 X U-bolt and screws
  • 2 X Remote
  • 1 X User's Manual
This automatic opener has an electronic obstruction system that provides safe and reliable operation. With a whisper quiet high-power unit and slim line design, it gives you the peace of mind that only quality workmanship can give. The roller door opener has an electric limited switch. It was designed for easy install and reliable, starting with safety features down to its profiled design. Security is taken care of by a rolling code technology remote handset that changes with every press of the button. This makes the roller door opener the right choice when choosing your roller door opener.
Minimum side clearance:
1. Minimum side clearance from door curtain to outside edge of mounting bracket: 135 mm (160 mm recommended).
2. Minimum side clearance between door curtain to inside edge of mounting bracket: 85 mm (110 mm recommended).
3. For ease of installation, minimum side clearance from outside edge of bracket to wall should be 155 mm.
Right-hand installation:
1. When the door roll is on the floor, rotate shaft backwards and forwards by hand and then release. This action will allow the roll to centralize itself on the shaft.
2. Slide drive unit onto shaft, ensuring drive lugs engage fully with the narrowest spoken on drum wheel.
3. Lifting door onto mounting brackets(ensuring curtain roll is round in correct way) centralize curtaun roll with opening.
4. Ensure motor assembly is fully engaged with drum wheel spokes. Clamp shaft to mounting brackets using"U" Bolts supplied. (Use "U" bolt in opener pack for MOTOR end).
5. Disengage the motor drive by pulling the manual release string downwards.
6. Ensure door is correctly balanced and is not binding or sticking within vertical tracks.
7. Ensure locking bars(if fitted) are moved to the retracted(unlocked) position and keys removed from the lock.
8. Mount control unit approximately 1.6m from the floor out of the reach of children. Use NO.4X1"self-tapping screws and raw plugs supplied. Ensure aerial is clear of all steel supports and coiled electrical leads. Fit plug from motor unit into bottom of control box.
9. Connect the control unit power cord to an adjacent socket. Ensure that the socket is properly earthed.

Note:

Right-hand installation only. If left hand, limit switch will be reversed.

  • Utilize USA Microchip for controlling the motor, reliable and stable.
  • Powerful and quiet DC motor
  • Soft start, soft stop, smooth operation
  • Easy installation and programming
  • Automatic safety reverse when obstructed
  • Manual release in case of power failure
  • LED light courtesy
  • Photo-beam/ Safety sensor are available (optional)
  • Backup battery function is available (optional)
  • Access control is available (optional)
  • Right and left side installation are available
  • Auto close option
  • 2 remote
  • 2 years warranty
  • CE certification
Specifications:
  • Standby power consumption: 7 Watt
  • Max. Lift Force:800N
  • Input voltage: 220V/50Hz
  • Motor type: 24 V DC permanent magnet
  • Motor power: 100 Watts
  • Working temptature: -20°C-70°C
  • Control board voltage: 24V DC/5V DC
  • Light globle voltage: 36V/1.5W
  • Receiver type: FS6KAM
  • Transmitter frequency: 433.92MHZ
  • Control distance: 50m max.
  • Coding type: Rolling code
  • Number of code combination: Over 4.29 billion random codes
  • Maximum door opening: 270 sq.ft
  • Maximum height/Drum rotations: 5 m

Package Content:
  • 1 X Motor
  • 1 X Control Box
  • 1 X U-bolt and screws
  • 2 X Remote
  • 1 X User's Manual

Shipping Policy

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days!

Shipping Times

We adopt  MCS, AU Post,TOLL only ship orders within Australia.

  • DELIVERY DAYS: 1-5 DAYS (1-5 DAYS FOR 99% OF AU)
  • Processing Time: 1 day
  • SHIP FROM AUME WAREHOUSE

     

    About Modification

    Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

    The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

     

    International Purchase

    Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

     

     

    Return Policy

    Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

    If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

     

    Satisfying Guarantee for Every Purchase

    Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

     

    Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

     

    1. All returns must be pre-approved. Unauthorized returns will not be accepted.
    2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
    3. The same warranty is provided for replaced products as the returned ones.

     

    If you are shipping the product

    1. Carefully pack the item(s) in original package.
    2. Stick the shipping label we offered on the outer
    3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
    4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.au.

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)