370w Circular Saw Blade Grinder Sharpener Machine Carbide Wood Grinding Electric
Rated 3.5/5 based on 11 customer reviews

370w Circular Saw Blade Grinder Sharpener Machine Carbide Wood Grinding Electric

Available: In Stock
Product SKU: 370WJPDMJ00000001V3
$264.99 AUD
The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. It's also suitable to grinde other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality. This item can shapen all the round saw blade, such as Skil saw. It adopts multi angle of swing, three dimensional slide structures to be in adaptation to the grinding of hard alloy saw blades with many specifications and purposes, which enables the grinding mill to maintain high accuracy and easy operation on any condition.
Circular carbide saw blade are widely used for cutting aluminum, wood and plastic materials. MF-126 type grinding machine is used for sharpening many sizes and types circular carbide saw blade. If you change the sanding wheel it can also sharp other common saw blade. It is a necessary assistant machine for cutting aluminum, wood and plastic materials.
Method of operation:
First, loosing the fascia, then adjust the angle of grinding blade and fasten.
Second, adjusting of center axle.
  • Rotating the center axle to the grinding blade.
  • Pushing the center axle to the right.
  • Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
  • Rotating the rotation table to ensure the angle of grinding blade.
  • The cross angle between the grinding surface and work surface is about 5.
Third, adjusting of positioning assembly.
  • Adjusting the saw blade to the grinding position, rotating the positioning frame and fascia.
  • Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
Safety remarks:
  • Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
  • The machine should be set in a dry, clean, steady and parallel place.
  • Release the round plat and then adjust the saw blade angle.
  • Check all parts that need locks before operation.
  • After the machine runs well then you can start the work.
  • Take off the electricity after work finishing.
  • Inform the factory before you change the machines.https://buyyou.net/ASC365_canada/Admin/190/000/2.jpg
  • 1.base

    2.box body

    3.end cover

    4.rotatary base

    5.rotary table base

    6.rotary table

    7.slide base

    8.slide disc

    9.table

    10.guide nut base

    11.guide screw

    12.slide block

    13.frame

    14.board

    15.positioning board

    16.safe cover

    17.press board

    18.adjusting bolt

    19.upright post

    20.long bolt

    21.short bolt

    22.long handle

    23.short handle

    24.positioning pin

    25.mat cover

    26.diamond wheel

    27.cover

    28.motor

    29.rear stuck disc

    30.fore stuck disc

    31.big pin

    32.small pin

    33.hand wheel

    34.round handle

    35.turret handle

    36.earth foot

    37.adjusting bolt base

    38.fastening handle

    39.switch

    40.screw

    41.lirnit pin

    42.washe

    43.cover







Features:
  • The machine structure is strong and it can work on max diameter φ700mm.
  • The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel.
  • The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face.
  • This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.
  • Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc.
  • Steel chassis construction.
  • Grinding wheel angle control with large aluminum knob.
  • Will hold each blade head position by a position lock.
  • Extra 2 blade hole adapter.
  • X axis feed wheel, stable and very sharp grinding.
  • Rotary angle mark.
  • Specifications:
  • Power: 370W
  • Voltage: 220V
  • Net Weight: 66.14lbs (30kg)
  • Running Speed: 3400 RPM
  • Adjusting Angle Of The Wheel: ±20°
  • Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
  • Working Diameter: 80-700mm
  • Grinding Wheel Size: 4.92" (125mm)
  • Bore Size Of Grinding Wheel: 1.26" (32mm)
  • Sanding Wheel Dimensions: 4.92" X 0.39" X 1.26"X0.2" X 0.08" (125 X 10 X 32x5x2mm)
  • Product Dimension: 30.3"X16.93"X11.81" (770 X 430 X 300mm)
  • Package Dimension: 16.93"X16.93"X13.58" (430 X 430 X 345mm)
  • Package Content:

    ORDERS

    NAME

    DESCRIPTION

    QT

    1

    Main Machine


    1 Set

    2

    Sanding Wheel

    φ125*10*32*5*2mm

    1Tablet

    3

    Saw Centering

    φ22φ30φ25

    Each 1 Set

    4

    Saw Centering

    φ40

    The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. It's also suitable to grinde other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality. This item can shapen all the round saw blade, such as Skil saw. It adopts multi angle of swing, three dimensional slide structures to be in adaptation to the grinding of hard alloy saw blades with many specifications and purposes, which enables the grinding mill to maintain high accuracy and easy operation on any condition.
    Circular carbide saw blade are widely used for cutting aluminum, wood and plastic materials. MF-126 type grinding machine is used for sharpening many sizes and types circular carbide saw blade. If you change the sanding wheel it can also sharp other common saw blade. It is a necessary assistant machine for cutting aluminum, wood and plastic materials.
    Method of operation:
    First, loosing the fascia, then adjust the angle of grinding blade and fasten.
    Second, adjusting of center axle.
    • Rotating the center axle to the grinding blade.
    • Pushing the center axle to the right.
    • Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
    • Rotating the rotation table to ensure the angle of grinding blade.
    • The cross angle between the grinding surface and work surface is about 5.
    Third, adjusting of positioning assembly.
    • Adjusting the saw blade to the grinding position, rotating the positioning frame and fascia.
    • Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
    Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
    Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
    Safety remarks:
    • Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
    • The machine should be set in a dry, clean, steady and parallel place.
    • Release the round plat and then adjust the saw blade angle.
    • Check all parts that need locks before operation.
    • After the machine runs well then you can start the work.
    • Take off the electricity after work finishing.
    • Inform the factory before you change the machines.https://buyyou.net/ASC365_canada/Admin/190/000/2.jpg
    • 1.base

      2.box body

      3.end cover

      4.rotatary base

      5.rotary table base

      6.rotary table

      7.slide base

      8.slide disc

      9.table

      10.guide nut base

      11.guide screw

      12.slide block

      13.frame

      14.board

      15.positioning board

      16.safe cover

      17.press board

      18.adjusting bolt

      19.upright post

      20.long bolt

      21.short bolt

      22.long handle

      23.short handle

      24.positioning pin

      25.mat cover

      26.diamond wheel

      27.cover

      28.motor

      29.rear stuck disc

      30.fore stuck disc

      31.big pin

      32.small pin

      33.hand wheel

      34.round handle

      35.turret handle

      36.earth foot

      37.adjusting bolt base

      38.fastening handle

      39.switch

      40.screw

      41.lirnit pin

      42.washe

      43.cover







    Features:
  • The machine structure is strong and it can work on max diameter φ700mm.
  • The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel.
  • The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face.
  • This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.
  • Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc.
  • Steel chassis construction.
  • Grinding wheel angle control with large aluminum knob.
  • Will hold each blade head position by a position lock.
  • Extra 2 blade hole adapter.
  • X axis feed wheel, stable and very sharp grinding.
  • Rotary angle mark.
  • Specifications:
  • Power: 370W
  • Voltage: 220V
  • Net Weight: 66.14lbs (30kg)
  • Running Speed: 3400 RPM
  • Adjusting Angle Of The Wheel: ±20°
  • Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
  • Working Diameter: 80-700mm
  • Grinding Wheel Size: 4.92" (125mm)
  • Bore Size Of Grinding Wheel: 1.26" (32mm)
  • Sanding Wheel Dimensions: 4.92" X 0.39" X 1.26"X0.2" X 0.08" (125 X 10 X 32x5x2mm)
  • Product Dimension: 30.3"X16.93"X11.81" (770 X 430 X 300mm)
  • Package Dimension: 16.93"X16.93"X13.58" (430 X 430 X 345mm)
  • Package Content:

    ORDERS

    NAME

    DESCRIPTION

    QT

    1

    Main Machine


    1 Set

    2

    Sanding Wheel

    φ125*10*32*5*2mm

    1Tablet

    3

    Saw Centering

    φ22φ30φ25

    Each 1 Set

    4

    Saw Centering

    φ40

    Shipping Policy

    Shipping Fees

    All the products are free shipped; but some remote areas may require extra fees.

    Delivery Times

    Note: Shipping time is influenced by the COVID-19, the delivery time will put off 3 days! Thanks for your understanding!

    After the customer places an order, the order processing time takes 1 to 2 days. So please make sure of entering correct payment and shipping information before checking out.

    We adopt the TOLL, Australia Post, Fastway, Direct Freight Express , Parcel freight logistics to ship your orders from the warehouse in Sydney. Delivery generally takes 2 to 6 days. For remote areas the delivery time will take two more days.

    About Modification

    Once your payment is completed, please inform us by phone or E-mail. And make any modifications before we dispatch your package. The customer will be responsible for all extra fees caused by address alteration if contact is made after the item has been dispatched.

     

    Return Policy

    We are dedicated to providing our customers with the best online shopping experience, making them 100% satisfied with their purchase. So, if you're not happy with your purchase for any reason, just go through our easy return process.

    Claim

    This return policy is only applicable to products with a 1-year warranty from our official site but does not pertain in other websites that sell Vevor products.

    Returning an Item:

    1.Arrived damaged

    We provide a free return of the product damaged on the way except artificial damage. When your product is broken, you need to send us the photos of broken product.

    2.Missing part

    If product parts are missing, we can send you the replacements or partially refund you your money.

    3.Wrong item sent

    If the product you received is not the one you bought, you could send the product photos to us and we will provide right one for you after verification.

    4.Doesn't work or defective

    When you received a product that does not work, you can contact our customer service team and we will provide corresponding technical support; if it does still not work, you can ask for a return. When the product is defective, you can ask our customer service to give you technical support or solution, if you repair it by yourself or in local store, we will provide you with some compensation; If you can't repair it by yourself or the local technique person, we will offer you a new item.

    Unacceptable Reasons for Free Return:

    1.Arrived too late

    •  We apologize for your long waiting. Due to most of our products belonging to heavy ones, the time for packaging is longer than that of the light ones.
    •  If you receive it too late for stock-out, we can make some compensation for you, such as coupon code or partial refund.

     

    2.Don't want it

    If you have already received the item but changed your mind and no longer want it, you cannot return the item and get a refund. Following situations are also unacceptable: mistaken ordering, changing mind, or price change.

    3.Doesn't match the description

    If you received the item not the same as the description or image, please give us feedback. Based on the specific reason, we will decide the return freight.

    4.Doesn't seem authentic/new

    As a premium brand operating for 5 years, our products are all new and genuine, and you can also search for them on other platforms.

    5.Without manual or non-standard manual

    When you received the package without the manual, please contact our customer service team immediately by email. The electronic version of instructions or video of installation will be sent as soon as possible to your electronic mailbox.

    6.Doesn't fit

    If the size you received does not fit because of our fault, you can immediately contact us to get a suitable solution.

    Unacceptable Reasons for Return:

    • Item was polluted accidentally.
    • Item was damaged by mistake when being used.

     

    How to return the product?

    Contact our customer service staff by email when you ask for a return, we will send you a return label in electronic version that you need to print and stick on the parcel. You can raise a pickup time or you could wait 1-2 days and then we will arrange for it.

    How about after returning items?

    1. We will send you a new item after receiving your parcel.
    2. If you want to get a refund after the product has arrived at our warehouse, you need to contact us.

    Note: We reserve all the right to the final interpretation of these terms. If you have any problem, please don't hesitate to contact us!