18x24 Flash Dryer Silkscreen Printing Temperature Drying Adjustable Ink Curing
Rated 3.5/5 based on 11 customer reviews

18x24 Flash Dryer Silkscreen Printing Temperature Drying Adjustable Ink Curing

Available: Out of Stock
Product SKU: 18*24WKSHGJ000001V3
$183.99 AUD
Successful pre-order.Thanks for contacting us!


Features & Details


  • 【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
  • 【LARGE DRYING AREA】- The effective heating area of the dryer reaches 18" x 24" (45 x 60cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
  • 【ACCURATE THERMOSTAT & SENSOR】- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.
  • 【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 24"-43".
  • 【SOLID X-SHAPED BASE】- The base of the 18x24 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.
Product Description
18" x 24" Flash Dryer
A professionally built, excellent flash dryer. It has an 18" x 24" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "十" that quickly gets a knock and stuck.
  • Excellent Quality
  • Large Drying Area
  • Adjustable Height
  • Accurate Thermostat & Sensor
Key Features


Extraordinary Quality

Thanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance.


Large Drying Area

The effective heating area of the dryer is 18" x 24" (45 x 60cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy.


Precise Thermostat & Sensor

This flash dryer 18x24 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time.


2000W Heating Tuber

2000W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.


Adjustable Height

On the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80cm-120cm adjustment range.


X-shaped Base

Compared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly.

Specifications
  • Heating Area: 18" x 24"(45 x 60cm)
  • Input: 110V/60Hz
  • Power: 2000 Watts
  • Minimum Height: 24"
  • Maximum height: 43."
  • Gross Weight: 75 lbs
Package Content
  • 1 X 18" x 24" Flash Dryer with Temperature Display


Features & Details


  • 【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
  • 【LARGE DRYING AREA】- The effective heating area of the dryer reaches 18" x 24" (45 x 60cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
  • 【ACCURATE THERMOSTAT & SENSOR】- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.
  • 【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 24"-43".
  • 【SOLID X-SHAPED BASE】- The base of the 18x24 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.
Product Description18" x 24" Flash Dryer
A professionally built, excellent flash dryer. It has an 18" x 24" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "十" that quickly gets a knock and stuck.
  • Excellent Quality
  • Large Drying Area
  • Adjustable Height
  • Accurate Thermostat & Sensor
Key Features


Extraordinary Quality

Thanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance.


Large Drying Area

The effective heating area of the dryer is 18" x 24" (45 x 60cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy.


Precise Thermostat & Sensor

This flash dryer 18x24 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time.


2000W Heating Tuber

2000W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.


Adjustable Height

On the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80cm-120cm adjustment range.


X-shaped Base

Compared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly.

Specifications
  • Heating Area: 18" x 24"(45 x 60cm)
  • Input: 110V/60Hz
  • Power: 2000 Watts
  • Minimum Height: 24"
  • Maximum height: 43."
  • Gross Weight: 75 lbs
Package Content
  • 1 X 18" x 24" Flash Dryer with Temperature Display

Shipping Policy

Shipping Fees

All the products are free shipped, and we will not ask for any shipping fees.

Delivery Times

Note: Shipping time is influenced by the COVID-19, the delivery time will put off 3 days! Thanks for your understanding!

After the customer places an order, the order processing time takes 1 to 2 days. So please make sure of entering correct payment and shipping information before checking out.

We adopt the TOLL, Australia Post, Fastway, Direct Freight Express , Parcel freight logistics to ship your orders from the warehouse in Sydney. Delivery generally takes 2 to 6 days. For remote areas the delivery time will take two more days.

About Modification

Once your payment is completed, please inform us by phone or E-mail. And make any modifications before we dispatch your package. The customer will be responsible for all extra fees caused by address alteration if contact is made after the item has been dispatched.

 

Return Policy

We are dedicated to providing our customers with the best online shopping experience, making them 100% satisfied with their purchase. So, if you're not happy with your purchase for any reason, just go through our easy return process.

Claim

This return policy is only applicable to products with a 1-year warranty from our official site but does not pertain in other websites that sell Vevor products.

Returning an Item:

1.Arrived damaged

We provide a free return of the product damaged on the way except artificial damage. When your product is broken, you need to send us the photos of broken product.

2.Missing part

If product parts are missing, we can send you the replacements or partially refund you your money.

3.Wrong item sent

If the product you received is not the one you bought, you could send the product photos to us and we will provide right one for you after verification.

4.Doesn't work or defective

When you received a product that does not work, you can contact our customer service team and we will provide corresponding technical support; if it does still not work, you can ask for a return. When the product is defective, you can ask our customer service to give you technical support or solution, if you repair it by yourself or in local store, we will provide you with some compensation; If you can't repair it by yourself or the local technique person, we will offer you a new item.

Unacceptable Reasons for Free Return:

1.Arrived too late

  •  We apologize for your long waiting. Due to most of our products belonging to heavy ones, the time for packaging is longer than that of the light ones.
  •  If you receive it too late for stock-out, we can make some compensation for you, such as coupon code or partial refund.

 

2.Don't want it

If you have already received the item but changed your mind and no longer want it, you cannot return the item and get a refund. Following situations are also unacceptable: mistaken ordering, changing mind, or price change.

3.Doesn't match the description

If you received the item not the same as the description or image, please give us feedback. Based on the specific reason, we will decide the return freight.

4.Doesn't seem authentic/new

As a premium brand operating for 5 years, our products are all new and genuine, and you can also search for them on other platforms.

5.Without manual or non-standard manual

When you received the package without the manual, please contact our customer service team immediately by email. The electronic version of instructions or video of installation will be sent as soon as possible to your electronic mailbox.

6.Doesn't fit

If the size you received does not fit because of our fault, you can immediately contact us to get a suitable solution.

Unacceptable Reasons for Return:

  • Item was polluted accidentally.
  • Item was damaged by mistake when being used.

 

How to return the product?

Contact our customer service staff by email when you ask for a return, we will send you a return label in electronic version that you need to print and stick on the parcel. You can raise a pickup time or you could wait 1-2 days and then we will arrange for it.

How about after returning items?

  1. We will send you a new item after receiving your parcel.
  2. If you want to get a refund after the product has arrived at our warehouse, you need to contact us.

Note: We reserve all the right to the final interpretation of these terms. If you have any problem, please don't hesitate to contact us!